Page 1 of 1
Good shop/mobile mechanic in vic?
Posted: Fri Mar 08, 2019 9:22 am
by RamblerRob
Hey guys,
I'm getting into a part of my project that may be more technical than my google educated wrenching skills are up for.
Any recommendations on good shops or mobile mechanics in the area to finish up an engine swap?
Re: Good shop/mobile mechanic in vic?
Posted: Fri Mar 08, 2019 6:27 pm
by Tony4921
What are you up to? Its a Landy, can't be too hard.
Re: Good shop/mobile mechanic in vic?
Posted: Sat Mar 09, 2019 7:57 am
by RamblerRob
It's not so much the Landy bits, it's the engine swap and wiring
Everything is bolted in place, but I can't find much good info on getting the chev 4.3 {2006) set up and running
Re: Good shop/mobile mechanic in vic?
Posted: Sat Mar 09, 2019 6:09 pm
by Tony4921
Are you using the GM fuel injection, or gone to a carb?
Re: Good shop/mobile mechanic in vic?
Posted: Sat Mar 09, 2019 7:48 pm
by RamblerRob
Whole gm set up. I have all the wiring and electronics from the truck.
Re: Good shop/mobile mechanic in vic?
Posted: Sun Mar 10, 2019 9:03 pm
by landcrabmechanic
Rob,
The ecm for the 4.3 needs a 12V switched power source as well as a 12V hot power source (direct from battery).
I am not sure which pins they are to the ecm. Do you have a year for the engine as well as which GM is came out of? do you have the GM wiring harness?
I might have some info for you when I come to Victoria first week of spring break.
Cheers
Scott in Vancouver
Landcrab Mobile Mechanical
Thanks for the sunroof