Page 1 of 1
front diff. cover
Posted: Wed Nov 10, 2010 1:18 pm
by tony
Anyone have any experience welding a end cap onto a diff.? Do I need to worry about distorting the Diff. casing/housing?
Posted: Wed Nov 10, 2010 8:48 pm
by red90
I have not done it, but have not heard of any problems. They do need to be modified to clear the stock panhard rod.
Posted: Wed Nov 10, 2010 8:51 pm
by red90
Posted: Wed Nov 10, 2010 9:16 pm
by kRiS
when I did mine I didn't do a continuous weld all the way around on the first pass, I would do a 1 -2 " weld and then same on the opposite side once
it was welded all the way around I did continuous weld all the way around on the top.
No distortion or leaks .
Kris