CB Mounting Place
Posted: Mon Jul 30, 2012 10:47 pm
I don't really know if this has been done before, but I've figured out a good place to put your CB in a RRC.
Step 1: Take the plastic insert from in your center console, mark out where you want to put your CB, and cut it right the first time.
Step 2: Take the piece you've just cut away and trim until your CB fits nice and snug.
Step 3: Take a soldering iron, and fuse the two pieces together. Use plastic scraps to fill in any gaps.
Step 4: Run a power source. I simply spliced into the cigarette lighter for the back seats.
Hope this may come in handy for somebody!
Step 1: Take the plastic insert from in your center console, mark out where you want to put your CB, and cut it right the first time.
Step 2: Take the piece you've just cut away and trim until your CB fits nice and snug.
Step 3: Take a soldering iron, and fuse the two pieces together. Use plastic scraps to fill in any gaps.
Step 4: Run a power source. I simply spliced into the cigarette lighter for the back seats.
Hope this may come in handy for somebody!