Hi all
Here is my problem we have a 95 Disco with a 3.9 engine and the power steering pump has failed (serpentine belt). I have a rebuilt pump that came out of my 110 3.5, the pulley is for a V belt.
Question is can I take the serpentine belt pulley off the bad pump and change it with the V belt pulley of the good pump?
If anyone has done this, or can be done let me know.
Thanks Bernie
power steering pumps
-
Bern B
- Hot Manifold
- Posts: 247
- Joined: Sat Oct 23, 2004 3:25 pm
- Location: Port Couitlam BC
-
rick.m
power steering
Bernie, Give RANDY at STEERING SOLUTIONS IN PORT KELLS A CALL. if he isnt able to help i would be suprized. he even likes land rovers/ lol.
-
Glenn D.
- Cross Member
- Posts: 193
- Joined: Fri Jan 14, 2005 12:14 pm
- Location: Vancouver
- Contact:
I changed my 200 tdi pump with a different model, I had to press on a new pulley mount, and machine the old one to fit. Mine is round and the spare had a triangular pulley mount.
It worked fine however the hose routing was a bit tight and the maching shop didn't align the pulley quite right so I ended up buying a new pump from Dixon for a very resonable price.
So it depend on the pulley mount (round or triangular).
And the hose routing.
And the alignment.
It can de done, but was a pain in the ass.
Glenn
It worked fine however the hose routing was a bit tight and the maching shop didn't align the pulley quite right so I ended up buying a new pump from Dixon for a very resonable price.
So it depend on the pulley mount (round or triangular).
And the hose routing.
And the alignment.
It can de done, but was a pain in the ass.
Glenn