Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Disable your ad blocker to continue using our website.
-
tony
- Little Wheel
- Posts: 83
- Joined: Sun Mar 04, 2007 3:33 pm
- Location: Fraser Valley
-
Contact:
#1
Post
by tony » Wed Nov 10, 2010 1:18 pm
Anyone have any experience welding a end cap onto a diff.? Do I need to worry about distorting the Diff. casing/housing?
-
red90
- Defender of the World
- Posts: 1509
- Joined: Mon Mar 08, 2004 7:19 pm
- Location: Calgary
#2
Post
by red90 » Wed Nov 10, 2010 8:48 pm
I have not done it, but have not heard of any problems. They do need to be modified to clear the stock panhard rod.
-
red90
- Defender of the World
- Posts: 1509
- Joined: Mon Mar 08, 2004 7:19 pm
- Location: Calgary
#3
Post
by red90 » Wed Nov 10, 2010 8:51 pm
-
kRiS
#4
Post
by kRiS » Wed Nov 10, 2010 9:16 pm
when I did mine I didn't do a continuous weld all the way around on the first pass, I would do a 1 -2 " weld and then same on the opposite side once
it was welded all the way around I did continuous weld all the way around on the top.
No distortion or leaks .
Kris
