Stat housing gaskets, flasher relay, and fuel sending unit

A Forum for discussion between Rover enthusiasts on Vancouver Island
Message
Author
davran

Stat housing gaskets, flasher relay, and fuel sending unit

#1 Post by davran » Sun Apr 19, 2015 9:57 pm

Hi,

Before I order them, does anyone on the Island have the two thermostat housing gaskets (I separated the bottom one first by mistake), a flasher relay, and fuel tank sending unit?

Thanks,

Greg S
Spanner Man
Posts: 844
Joined: Sat Feb 28, 2004 9:00 pm
Location: Duncan
Contact:

Re: Stat housing gaskets, flasher relay, and fuel sending un

#2 Post by Greg S » Tue Apr 21, 2015 10:37 pm

Gaskets come in a squeeze tube or aerosol can IMHO. Flasher unit is available from any parts store or auto wrecker, old style flasher, count the contacts on yours and ask for one with the same number of contacts. Fuel sender- I should have one around here for a Series 2 but I'm not sure if it before or after suffix D. That is the change in part numbers and I don't know the difference. What's wrong with yours?

davran

Re: Stat housing gaskets, flasher relay, and fuel sending un

#3 Post by davran » Wed Apr 22, 2015 7:18 am

Chel gauge isn't working. I took out the sending unit with attached float, and the electrical connector is broken.

Post Reply