I have a series 2A 88" that I have recently put parabolics on. sadly it came to my attention that now with softer springs, there must be a defect in the frame as the truck sits at least 1 1/2" lower on the drivers side. I have looked at the springs and am aware that they are produced to life the driver side up slightly and have not put them on backward (just to get that out the way)
Originally I thought it was the springs so I sent them back to rovers north for replacements. the new ones are no better on the front, but now the back sits up an extra 2" as they sent me different springs!!
My question is this. How do I level out my truck without changing the springs. I want it raised to the height of the rear springs and level all around.
My thoughts were to replace the rear hangers on the front springs but have no idea what that may do.
Any and all advice is truly appreciated as this is a big problem for me.
thanks in advance
Gerald
