Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Disable your ad blocker to continue using our website.
-
dan
- Little Wheel
- Posts: 80
- Joined: Wed Jan 04, 2006 7:14 am
#1
Post
by dan » Fri Jun 22, 2007 3:49 pm
Hi guys,
can I install a 200tdi motor with tranny and transfer case still attached? Or do I need to seperate the motor from the gearbox/tranfer case?
Currently my fenders are off. My 110 is an exmod. Tank u!
-
red90
- Defender of the World
- Posts: 1509
- Joined: Mon Mar 08, 2004 7:19 pm
- Location: Calgary
#2
Post
by red90 » Sat Jun 23, 2007 6:49 am
If the 200TDI, gearbox and t. case came out of a Defender, it will go straight in. If it came from a Discovery, then no, you need to keep the current gearbox and do some other mods to fit.
The factory 200TDI kit installation manual is here:
http://www.landrover.ee/est/files/manua ... 20info.pdf
-
dan
- Little Wheel
- Posts: 80
- Joined: Wed Jan 04, 2006 7:14 am
#3
Post
by dan » Sat Jun 23, 2007 7:27 am
Hi red,
thats awesome. thank you for the link. The guy I bought the engine from told me it was a defender engine, and the pics in the link you provided confirm it.
Thank you again. Cheers, Dan.
-
moose
- Newbie
- Posts: 33
- Joined: Sat Apr 16, 2005 4:22 pm
#4
Post
by moose » Sat Jun 23, 2007 11:29 am
Hey Red90, you wouldn't happen to have a link to a 300Tdi instillation manual would you? I am gathering parts but not sure what all I need.
Brett
-
red90
- Defender of the World
- Posts: 1509
- Joined: Mon Mar 08, 2004 7:19 pm
- Location: Calgary
#5
Post
by red90 » Sat Jun 23, 2007 6:51 pm
No that link was for the factory retrofit kit from a 2.5TD to a 200TDI.
Installing a 300TDI requires a bit of custom modifications. A 200TDI (from a Defender) is a straight bolt up.
