I am considering a 92 RRC with a damaged transfer case. A 1988 RRC is available as a donor vehicle. Is it easier to convert the 92 transmission to the older transfer case or would it be easier to swap the whole tranny and transfer case together from the 88 to the 92?
Thanks, Rob
RRC transfer case swap?
-
Rob
- Greasy Fingers
- Posts: 762
- Joined: Wed Aug 25, 2004 12:37 am
- Location: Ladysmith
-
rezdiver
- Master Cylinder
- Posts: 386
- Joined: Sat Aug 06, 2005 6:22 pm
- Location: Cumberland
Rob,
as long as it has the same borgwarner tcase then the swap is easy to just to do the transfercase.
I think Greg S on this board also has a tranny and tcase he may be willing to part with.
is the 88 a parts vehicle? i may be interested in some parts.
cheers,
Reza
as long as it has the same borgwarner tcase then the swap is easy to just to do the transfercase.
I think Greg S on this board also has a tranny and tcase he may be willing to part with.
is the 88 a parts vehicle? i may be interested in some parts.
cheers,
Reza
Last edited by rezdiver on Sat Dec 01, 2018 7:36 am, edited 1 time in total.
-
nakedbarra
- Mud Pit Boss
- Posts: 348
- Joined: Fri Mar 26, 2004 12:10 pm
hmmmmmmmm
I swapped my borgwarner for an LT230 in my 1993 rangie and it was a relatively easy swap as you just need the lt230 shifter and the front shaft is a different length and sort some simple wiring out but its not hard if you have a moderate mechanical knowledge.
Andrew
Andrew