Needed: Rover type 4.7:1 diff for 1960 SW

Forum rules
By posting in this forum, you agree not to post anything abusive, obscene, vulgar, slanderous, hateful or threatening, Doing so may lead to you being immediately and permanently banned.
Post Reply
Message
Author
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Needed: Rover type 4.7:1 diff for 1960 SW

#1 Post by Gordwedman » Thu Dec 08, 2022 5:24 pm

My brother backed into a concrete barrier and shattered the rear diff in his 1960 109 station wagon. Anyone know of a source in BC for a replacement? Thanks.//uploads.tapatalk-cdn.com/202212 ... b7bfad.jpg//uploads.tapatalk-cdn.com/202212 ... 31cee7.jpg

Sent from my SM-G996W using Tapatalk

Top
Tony4921
Out of Africa
Posts: 416
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#2 Post by Tony4921 » Thu Dec 08, 2022 6:09 pm

I have several in Duncan, BC
Top
Tony4921
Out of Africa
Posts: 416
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#3 Post by Tony4921 » Thu Dec 08, 2022 6:18 pm

I have several in Duncan, BC. When you say "backed in" what the hell was he doing. Thats destroyed!
Top
franko
Out of Africa
Posts: 421
Joined: Wed Jan 20, 2010 9:15 am
Location: Victoria BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#4 Post by franko » Fri Dec 09, 2022 4:25 pm

crazy! there is more to this story. no way that happens from just 'backing in"
Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#5 Post by Gordwedman » Fri Dec 09, 2022 9:11 pm

Tony4921 wrote:I have several in Duncan, BC. When you say "backed in" what the hell was he doing. Thats destroyed!
I am planning to come over to the Island for a few days starting on the 19th so could pick one up. What would you like for one?
Yes, he did back into a concrete barrier. He won't say how fast he was going. I will send a photo of the bumper tomorrow.

Sent from my SM-G996W using Tapatalk

Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#6 Post by Gordwedman » Sat Dec 10, 2022 9:52 am

OK, here is a photo of the rear driver's side corner. Pushed in a couple of inches.
//uploads.tapatalk-cdn.com/202212 ... 30c802.jpg

Sent from my SM-G996W using Tapatalk

Top
franko
Out of Africa
Posts: 421
Joined: Wed Jan 20, 2010 9:15 am
Location: Victoria BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#7 Post by franko » Sun Dec 11, 2022 7:33 am

Wasn't this one recently for sale?
Top
Tony4921
Out of Africa
Posts: 416
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#8 Post by Tony4921 » Sun Dec 11, 2022 10:14 am

$250 sound ok?
Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#9 Post by Gordwedman » Tue Dec 13, 2022 11:13 am

Hi Tony
250 sounds good. What is your address and is there any particular day and time that is good for you. Monday afternoon would work best for me. Thanks

Sent from my SM-G996W using Tapatalk


Last edited by Gordwedman on Tue Dec 13, 2022 11:13 am, edited 1 time in total.
Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#10 Post by Gordwedman » Tue Dec 13, 2022 11:14 am

franko wrote:Wasn't this one recently for sale?
Yes, my brother has had in on Craigslist twice.

Sent from my SM-G996W using Tapatalk

Top
Tony4921
Out of Africa
Posts: 416
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#11 Post by Tony4921 » Tue Dec 13, 2022 1:36 pm

Any time/day is good to collect, just let me know.
Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#12 Post by Gordwedman » Wed Dec 14, 2022 9:28 am

Tony4921 wrote:Any time/day is good to collect, just let me know.
Monday the 19th in the afternoon. Not sure what the time will be. I will be heading up from Sidney and could message you when I leave.

Sent from my SM-G996W using Tapatalk

Top
Tony4921
Out of Africa
Posts: 416
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#13 Post by Tony4921 » Wed Dec 14, 2022 4:13 pm

Ok, sounds good.
Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#14 Post by Gordwedman » Mon Dec 19, 2022 8:43 am

Good morning. I will be arriving in Nanaimo around 12 noon. I can come by to pick the diff then. I could come tomorrow if necessary. Let me know if today works and your address. Thanks

Sent from my SM-G996W using Tapatalk

Top
Tony4921
Out of Africa
Posts: 416
Joined: Sun Jan 11, 2015 7:34 pm
Location: Duncan,BC

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#15 Post by Tony4921 » Mon Dec 19, 2022 9:28 am

Ok, roughly what time today?
Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#16 Post by Gordwedman » Mon Dec 19, 2022 10:44 am

Ferry is leaving a bit late at 11 and it is 2 hours so will be in Nanaimo around 1.

Sent from my SM-G996W using Tapatalk

Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#17 Post by Gordwedman » Mon Dec 19, 2022 1:18 pm

I am in Ladysmith. What is your address?

Sent from my SM-G996W using Tapatalk

Top
Gordwedman
Half Shaft
Posts: 131
Joined: Fri Feb 15, 2019 7:44 pm
Location: Chilliwack

Re: Needed: Rover type 4.7:1 diff for 1960 SW

#18 Post by Gordwedman » Mon Dec 19, 2022 3:05 pm

For some reason your address did not show up in Tapatalk. Just saw it now in my emails. Today is a bit late. Would 1PM tomorrow work for you?
Top
Post Reply

Return to “Vehicles and Parts Wanted”