300TDI Turbo Question

Message
Author
obalme
Crank Case
Posts: 120
Joined: Thu Oct 05, 2006 9:11 pm
Location: Cobble Hill

300TDI Turbo Question

#1 Post by obalme » Mon Oct 26, 2015 10:30 pm

I think my 300 TDI turbo is finished, will know in a few days. the waste gate is stuck and the fan feels a little ruff when you turn it.

The question is, should I up grade to a different turbo or stick with the same one and/or are they worth fixing

Thanks for any advice in advance

Oliver

red90
Defender of the World
Posts: 1509
Joined: Mon Mar 08, 2004 7:19 pm
Location: Calgary

Re: 300TDI Turbo Question

#2 Post by red90 » Tue Oct 27, 2015 5:44 am

There are a few options.

Have it rebuilt locally. Probably not the best bang for the buck unless you do most of it yourself.

Buy a CHRA and install it into the housing yourself (pretty easy to do). These are about $300 plus shipping from the UK. http://www.turborebuild.co.uk/webshop/p ... -Core.html

Buy a new turbo. These are around $850 plus shipping.

Buy an upgraded one. About the only thing on the market these days is the Turbo Technics VNT. This gives you boost a bit earlier. They cost about $1900 for the conversion kit plus shipping.

The wastegate should be easy to fix on its own.

BOlson
Three Wheeler
Posts: 100
Joined: Sun Jan 10, 2010 12:59 pm
Location: richmond

Re: 300TDI Turbo Question

#3 Post by BOlson » Wed Oct 28, 2015 10:04 pm

ADP distributors in Langley can probably rebuild it

http://www.adpdistributors.com/turbochargers.html

Post Reply