Finally bit the bullet and ordered 4 new doors....

Message
Author
withabix
Cylinder bore
Posts: 452
Joined: Sun Oct 13, 2013 2:24 am
Location: Maple Ridge
Contact:

Finally bit the bullet and ordered 4 new doors....

#1 Post by withabix » Tue Jul 20, 2021 9:24 am

Went for fully-galvanised doors from SP-4x4 in Liverpool.

Looking for recommendation for a paint shop in the lower mainland to take the loose doors to for painting, before I build them up.

landcrabmechanic
Hot Manifold
Posts: 240
Joined: Thu Jul 19, 2018 4:55 pm

Re: Finally bit the bullet and ordered 4 new doors....

#2 Post by landcrabmechanic » Tue Jul 20, 2021 9:26 am

I use Vancity Autobody on kingsway for most of my painting needs.

withabix
Cylinder bore
Posts: 452
Joined: Sun Oct 13, 2013 2:24 am
Location: Maple Ridge
Contact:

Re: Finally bit the bullet and ordered 4 new doors....

#3 Post by withabix » Mon Aug 02, 2021 8:48 pm

Doors were dispatched on Friday and arrived on Tuesday!

To give you some idea of how bad one of my doors was, take a look at this…

20ECA3A4-D414-4388-AF7B-4DE24C1C580D.jpeg
(147.72 KiB) Downloaded 126 times
Once I’ve finished, I will be posting the door carcasses for refurbishment. They require various levels of refurbishment, ranging from the front right which has evidently been previously refurbished and is reusable as it is, to that right 2nd row above, which might yield some material…

I’m re-using all of the hardware except perished rubber, so they would be completely bare.

bclandrover
Out of Africa
Posts: 401
Joined: Wed Feb 25, 2004 11:21 pm
Location: North Vancouver
Contact:

Re: Finally bit the bullet and ordered 4 new doors....

#4 Post by bclandrover » Mon Aug 23, 2021 5:06 pm

HI Iain,

Rovalution has an entire division with Red Seal Autobody and re-finishing technicians, dedicated to accessorizing, upgrading and restoring Land Rovers.

We be happy to discuss the costs to do this work for you.

Please give our Projects Manager, John a call 604-985-6317 Option2

Thanks,
Don

Post Reply